ZipWall ZipPole ZP4 Low Cost Spring Loaded Pole, 4-Pack Kit with Carry Bag Description:
- Amazon Sales Rank: #480 in Home Improvement
- Brand: ZipWall
- Model: ZP4
- Number of items: 1
Features
- High-quality/durability, sets up fast, no tape, no ladders, no damage
- Build a 30 foot barrier in under 5 minutes, Height: 51 inches to 10-feet 3 inches, accepts sheeting up to 8 mils thick, each ZipPole weighs 1.5lbs.
- Each ZP4 package contains 4 ZipPoles a head, plate, tether, and GripDisk for each pole, 1 box of Standard Zippers, 1 Carry Bag
- Meets strict ANSI certification for quality
- One year warranty
Customer Reviews:
If you are work in occupied homes - you must have these!
We have been using Zipwall Poles for 4 years now. After purchasing our first 4 pack from Sherwin Williams, we set up a house and sprayed a kitchen, controlling our airfow without nails, screws, or staples up into the ceiling holding the plastic. These things are great - they set up quickly, collapse down to move and store easy, and make you look professional while keeping the rest of the home clean. If you are doing a project that will require the plastic to be up for awhile, make sure you add the zippers and make a door. If it is just for our access, we will install one zipper. If the client will be coming through over the weekend, or for a few weeks, we install two about 2′ apart allowing you to roll up the door over the weekend.
We have seen some competitor produucts at work on other job sites. There was one that has a small latch that digs into the side of the pole to hold it up. I can’t help but think that that mark on the outside, each time you move the poles, will make them look chewed up and narly. The Zip Pole cam system is inside the tube - you don’t have any marring. Plus, all you do is press it to the ceiling, leave a bit of room for sliding the bottom plastic under, then twist it. #With that in mind, make sure you do not let any tape get stuck to the poles that slide inside - the tape glue can cause the cams to malfunction.#
When setting up the poles, we find it bext to place our poles where we will want them, then start at one end on a ladder and attached the plastic to the head. Pulling the plastic snug as you go, we attach the plastic to the next head and so forth. Once all heads are placed, then lift the bottom and slide the plastic under - creating a tight wall. You can do it all from the floor, but you have to be careful where you attach the plastic - we find doing it at the top on a ladder just a bit faster.
As stated up top, if you are working in occupied homes, you need a set of these. Since introducing the newer steel shaft version, they have dropped the price enough to be even better!
Zipwall Zip pole system
Zipwall is just what I have been missing in my remodeling business. It is very difficult to keep construction dust from entering unwanted areas. This allow me to me keep the debris in the construction zone and keep happy customers. If you are going to do DIY remodeling projects, you need this for peace of mind.ZipWall 4PL Plus Kit with Carry Bag, 4-Pack
Very satisfied
I have used Zip poles for many years and have found them very helpful for my wood floor refinishing/painting business. They are not only useful for the containment of dust in the work space but it also make my service look so much more professional when I do not have to tape or tack plastic sheeting to my customers walls.
I feel that taking good care of my customers property is as important to my reputation as the quality of my workmanship.
I have also had good experience with the quality of this product. I have never had a Zip pole break, even with less than careful handling by my employees, they have always held up.
I highly recommend this product.
Thank you,
Paul Duffy
Amazon.com Product Description
Made of steel, the award-winning ZipWall ZP4 ZipPole Spring-Loaded Poles are available in a convenient four-pack that includes two Standard Zippers and a heavy-duty Carry Bag. This kit will let you create a temporary dust barrier in just a few minutes, without ladders, tape, staples, or furring strips that can damage the walls or the ceiling. It’s the ideal convenience pack for contractors, maintenance crews, and home owners.
Introducing the Low-Cost ZipPole Spring Loaded Pole Four-Pack Kit with Carry Bag
 |
The ZipPole ZP4 4-Pack contains the framework you need to create a ZipWall Barrier System, including:
- 4 ZipPole 10-foot steel Spring-Loaded Poles
- ZipWall AZ2 Standard Zipper 2-pack
- 12-Pole Capacity Carry Bag
- All necessary adapters, plates, and tethers (plastic or cloth barrier material must be purchased separately.)
Add to Your ZP4 4-Pack with these items:
- ZipPole 10-foot Spring-Loaded Poles: ZP2
- ZipWall HDAZ2 Heavy-Duty Zipper 2-pack
- ZipWall AZ2 Standard Zipper 2-pack
- ZipWall Foam Rails
- ZipWall SDPK Side Pack
|
|
 |
|
 |
With the ZP4 kit, one person can create a sturdy barrier in a matter of minutes.
(Click images above to view larger.) |
With the ZipPole Four-Pack you can create a dust barrier up to 30 feet long, and you can use the system again and again. The ZP4 includes four ZipPole Spring-Loaded Poles, two Standard Zippers, and a convenient Carry Bag that can hold up to 12 poles. Plastic sheeting is not included.
Winner of the Remodeling Show 2009 Best New Product Award
The ZipPole product is made of steel for durability and strength. These poles can support up to 80 pounds each, and their height can be adjusted from 4′ 2″ to 10′ 3″. They can handle plastic or cloth sheeting up to eight mils thick. In fact, ZipPole products are the winner of the Remodeling Show 2009 Best New Product Award, and they have all the patented features of the original award-winning ZipWall Spring-Loaded Poles.
Ideal for a Wide Range of Construction Projects
This system is ideal for a wide variety of residential, commercial, and DIY projects that create dust or other potentially harmful debris. These projects include demolition, drywall work, plaster repairs, insulating walls and ceilings, sanding and painting, chimney work, kitchen and bath renovation, and more. Small and lightweight, the ZipPole Four-Pack is easy to handle and can fit in the trunk of a car.
Easy to Use, No-Damage Installation
ZipWall systems remove the need for tape, staples, glue, furring strips, and ladders when creating a temporary dust barrier. This saves time and it eliminates costly repairs to finished surfaces.
Sheeting is securely attached at the top of the pole by sandwiching the material between the interlocking head and plate. The twist-locking telescoping pole lets you raise the sheeting quickly and easily without a ladder.
All ZipWall pole systems feature Spring Loading at the top. This lets you lift the pole to tuck the sheeting underneath for easy setup. It also maintains constant tension on the pole, compensating for movement at the ceiling or at the floor if the poles are bumped, or if there is a lot of air movement at the jobsite.
The ZipPole barrier system is locked in place with non-skid, non-marking pads at the top of each pole. These pads grab the ceiling like magic. The non-skid GripDisk keeps the foot of each pole and the sheeting locked in position at the floor.
Ideal for Dropped Ceilings or When Running Negative/Positive Air Pressure
The ZipPole product is ideal for dropped ceilings. Just place the poles so the tops push against the grid. Then, follow the grid until you have created a barrier of desired size. Spring Loading keeps the barrier in position by automatically adjusting the pole height to compensate for any movement of the grid during setup.
If you are renovating a space where negative or positive air pressure is required, the non-skid pad at the top of the pole, the non-skid GripDisk under the foot of the pole, and internal Spring Loading will keep the ZipWall dust barrier securely in position.
Create a Doorway Easily with the Standard Self-Adhesive Zippers
With the two Standard Zippers included in the ZP4 kit, you can create a doorway anywhere in the plastic sheeting. Use one zipper for a simple doorway or place two zippers side by side to create a wide roll-up doorway. The wide doorway makes it easy to move equipment and building materials in and out yet still maintain a dust-tight seal when closed.
Easy, One-Person Installation in Just Minutes
Using old-fashioned methods, a barrier 30 feet long and 10 feet high would take between one and three hours to erect. With the ZipPole Spring-Loaded Poles, the same barrier can be installed in a matter of minutes.
Unlike barriers made with tape, staples, glue, or furring strips, this dust barrier system won’t come down unexpectedly or cause damage to finished surfaces. Best of all, you can use a ZipWall dust barrier system again and again.
Works with Other ZipWall Products
The ZipPole Four-Pack gives you the complete framework for a 30-foot-long sealed workspace. All you need is a roll of plastic sheeting. If you want to enclose a larger space, purchase additional ZipPole Spring-Loaded Poles in the convenient the ZP2 Two-Pack.
This ZipPole product can be used with ZipWall’s Tight Seal accessories, including Foam Rails, to create a continuous seal along the ceiling. It can be used with the ZipWall Side Pack to create a continuous seal along the walls. Doorways can easily be created with ZipWall’s Heavy-Duty or Standard Zippers.
If you are working with ceilings over 10 feet tall, you can purchase ZipWall’s original 12-foot Spring-Loaded Poles in the handy SLP2 Two-Pack, SLP6 Six-Pack, or Four-Pack Plus Convenience Pack. For cathedral or vaulted ceilings, or ceiling heights over 12 feet, you can also purchase ZipWall’s 20-foot KT-20 Spring-Loaded Poles.
Protect Children and Property from Lead-Dust Contamination
Providing a dust-tight seal around worksites is very important, especially when doing demolition or when renovating an older home that has lead paint. In fact, the Environmental Protection Agency (EPA) mandates that dust be contained when as little as six square feet of lead paint is disturbed in homes or facilities where there are children under six years old.
Go to www.epa.gov/lead to get details on the latest lead-safety rules and lead-safe work practices. New EPA laws are an important reason to keep a ZipWall Barrier System on hand.
What’s in the Box
The ZipPole ZP4 Kit includes four 10-foot Spring-Loaded Poles, a box of two Standard Zippers, a 12-Pole capacity Carry Bag, and all necessary adapters, plates, and tethers.
From the Manufacturer
Each ZP4 package contains 4 ZipPoles a head, plate, tether, and GripDisk for each pole, 1 Carry Bag and 1 box of Standard Zippers. The ZP4 4-Pack is our new low-cost temporary dust barrier starter kit designed for commercial and residential contractors, as well as the DIY enthusiast. Strong, lightweight, compact, its 10’ height is tall enough for many jobs, yet it is compact enough to fit in the trunk of a car. Like our Contractor Grade aluminum spring-loaded poles, the ZipPole eliminates the need for tape, ladders or staples, so it will not damage finished surfaces. The included Carry Bag makes it easy to store and transport your ZipWall system. It can hold up to 12 ZipPoles or additional accessories. The ZipPole offers all the advantages of our Contractor Grade products. The twist-locking telescoping pole lets you raise the sheeting to the ceiling without a ladder. The exclusive spring-loaded mechanism at the top lets you lift the pole to tuck the sheeting under the foot while keeping the barrier under tension at all times. ZipPole’s height ranges from 51-Inch to 10-foot3-Inch. Consider the labor savings of a ZipWall dust barrier system: A 30 foot long 9 foot high barrier takes about 1 hour to erect using conventional methods. With the ZipPole system, the same barrier can be completed by one person in under 5 minutes. ZipPoles are made of rugged steel tubing. They have a baked-on finish and weigh just 1.5lbs each. Ideal for many uses, they can accept plastic or cloth sheeting up to 8 mils thick and can support up to 80 lbs each. ZipPoles work with all of our Tight-Seal accessories. Push the plastic sheeting tightly against the ceiling by adding Foam Rails. You can also seal tightly along the walls by adding our Side Pack. Poles should be placed every 8-foot to 10-foot or closer if there is a lot of air movement. Use a GripDisk under each pole to secure it on smooth flooring like vinyl or wood. ZipWall is a registered trademark of ZipWall LLC.
